How this calculator works
Wax volume to weight: molten wax at pouring temperature (around 180°F / 82°C) is about 0.86 g/ml for soy and 0.95 g/ml for paraffin. Container volume × density = wax weight needed. A 240 ml (8 oz) container holds 240 × 0.86 = 206 g of soy wax or 228 g of paraffin, with a small headspace.
Multiply by number of candles. 12 containers × 206 g = 2,472 g = 2.47 kg of soy wax for the batch. Buy a 2.5 kg block to allow for 1%–2% loss during melting.
Fragrance load is a percentage of the wax weight, usually 6%–10%. 206 g wax × 8% = 16.5 g fragrance oil per candle. The upper limit is set by the wax maker — soy typically caps at 10% to avoid "sweating" (oil pooling at the top).
Total pour weight = wax + fragrance. 206 + 16.5 = 222.5 g per candle. Multiplied across the batch, that is the amount you weigh out before adding fragrance after the wax has melted and cooled to the correct temperature (160°F for soy, 185°F for paraffin).
Convert between units: 1 ounce = 28.35 g; 1 fluid ounce ≈ 29.57 ml (close enough for candle math). The tool shows both so you can match whatever your wax supplier uses.
Worked example
Making 12 soy candles in 240 ml (8 oz) containers at 8% fragrance load
- Wax per candle: 240 ml × 0.86 g/ml = 206 g.
- Fragrance oil per candle: 206 × 8% = 16.5 g.
- Total per candle: 206 + 16.5 = 222.5 g (about 7.85 oz).
- Batch of 12 candles: wax 206 × 12 = 2,472 g (2.47 kg); fragrance 16.5 × 12 = 198 g (7 oz).
- Buy 2.5 kg wax (next-rounded supplier size) and 240 g (half-pound) fragrance oil for a one-pour-mistake buffer.
Common mistakes
- Over-fragrancing. 15% fragrance oil will not throw scent 15% better — it leads to sweating, poor burn and wasted oil.
- Adding fragrance at the wrong temperature. Too hot = burns off; too cold = doesn't bind.
- Forgetting the dye or color block in weight calculations. Usually small (0.5%–1%) but worth including.
- Pouring to the brim. Leave 10–12 mm of headspace to avoid overflow when the wax expands slightly as it sets.
- Using supplier "ounces" interchangeably between fluid and weight. Weight-ounces are different from fluid-ounces, and candle math uses weight.
Limitations of this calculator
- Density values are approximations; actual wax density varies 1%–2% between manufacturers.
- Does not include wick selection, dyes or additives (vybar, stearic acid).
- Assumes a standard container; irregular shapes need volume measured, not calculated.
For your specific situation, consult a tax professional or financial advisor.
Questions people ask
What percentage of fragrance oil should I use?
Soy wax: 6%–10%, with 8% as the sweet spot. Paraffin: 6%–12%. Coconut-soy blends: 8%–10%. Higher loads can look great cold but may cause oil sweating, poor burn, or scent throw problems. Start at 8% and adjust.
What temperature should I add fragrance?
Soy: 160–185°F. Paraffin: 180–185°F. Coconut-apricot: 190°F. Adding at the right temperature matters more than exact percentage — too hot and the oil burns off; too cool and it won't bind.
How much wax to buy for a batch?
Multiply per-candle wax weight by the number of candles, then add 2%–3% for melting loss and spills. For small-batch testing (3–5 candles), buy at least double the math so you can re-pour a bad test.
Do fragrance oils count toward the wax weight?
They are added to the melted wax before pouring. Container capacity should hold wax + fragrance; the tool's math already includes both.
Sources
Last reviewed October 19, 2026