How this calculator works
The waist radius comes from the circumference formula C = 2πr. For a full circle skirt the waist cutout is a complete circle, so r = waist ÷ (2π). A 28-inch waist needs a 4.46-inch cutout radius. For a half circle the waist arc is half the circumference, so r = waist ÷ π = 8.92 inches. Quarter circle: r = 2 × waist ÷ π = 17.83 inches. Three-quarter: r = 2 × waist ÷ (3π) = 5.94 inches.
The hem radius is the waist radius plus the finished skirt length. Add 0.5–1 inch for seam allowance at the waist and 1 inch for a double-folded hem. A 24-inch skirt length on a 28-inch waist full circle: waist radius 4.46 + skirt 24 + hem allowance 1 = 29.46-inch outer radius.
Fabric width matters. The outer diameter of the full circle (29.46 × 2 = 58.9 inches) must fit on the fabric width. Standard quilting cotton (42 inches) is too narrow for a full circle in one piece — you need to buy wider fabric (54, 60 or 72 inches) or seam two half-circles together.
Yardage: for a full circle in 60-inch fabric where the outer diameter fits, the length needed is twice the outer radius = 58.9 inches = 1.64 yards. Round up to 1.75 yards for safety. Half-circle in 60-inch fabric: outer diameter 29.5 inches, length needed ≈ 30 inches = 0.83 yards; round to 1 yard.
Bias stretch: parts of a circle skirt are cut on the bias, which stretches more over time. The skirt will hang longer at those points. Cutting the hem AFTER a day or two of hanging allows the bias stretch to settle so your hemline stays even.
Worked example
Full circle skirt for a 28-inch waist, 24-inch length
- Waist radius: 28 ÷ (2π) = 4.46 inches.
- Outer radius: 4.46 + 24 (skirt) + 1 (hem allowance) = 29.46 inches.
- Outer diameter: 58.9 inches. Requires at least 60-inch fabric for a one-piece full circle.
- Fabric length needed: 58.9 inches ≈ 1.64 yards. Buy 1.75 yards for safety.
- If using 42-inch fabric: must piece two half-circles. Buy 2 × 30 inches = 60 inches = 1.67 yards. Round to 1.75 yards.
Common mistakes
- Hemming right away. Bias stretch creates a wavy hem days later. Hang first.
- Forgetting hem allowance. 1 inch for a clean double-fold hem.
- Buying fabric before checking width. A 42-inch bolt cannot cut a full circle for a long skirt in one piece.
- Ignoring stretch: fabrics with lycra or stretch cotton give differently than non-stretch; test a sample.
Limitations of this calculator
- Assumes a flat circle; does not model gored or paneled constructions.
- Does not include closure (zipper, button) placement.
- Does not account for pattern direction on directional prints — you may need more fabric.
For your specific situation, consult a tax professional or financial advisor.
Questions people ask
Full, half or quarter circle — which is right?
Full = maximum twirl, biggest skirt. Half = moderate fullness, less fabric. Quarter = modest flare, closest to A-line. Three-quarter = compromise. For dance costumes, full circle. For everyday wear, half or three-quarter.
How much ease should I add to the waist?
0.5–1 inch for a fitted waistband; 2–3 inches for an elastic waist that pulls over the hips. The calculator uses finished waist measurement; adjust as needed.
Can I use quilting cotton for a circle skirt?
For small circles yes; for a full-length full circle, no — the fabric is usually too narrow (42 inches). Try apparel fabric at 54–60 inches, or piece two half-circles.
Why does my hem go wavy?
Bias stretch. Parts of the circle are cut diagonally to the grain and stretch over time. Hang the skirt 24–48 hours before hemming so stretch settles.
Sources
Last reviewed October 19, 2026