Built in Lahore, PakistanHow we check the math
Craft & making

Epoxy Resin Calculator

Enter dimensions and pour depth to get the exact volume of epoxy to mix — plus how to split a river-table pour across multiple deep-pour layers.

Units
Shape
1/8 in (3 mm) is a typical tabletop flood coat.
For river tables, the share of the surface that is resin.
Covers drips, edges and mixing cups.
Mix ratio (by volume)

Resin you need

21.9 fl ozTotal mixed resin, including waste

US fluid ounces21.9 fl oz
Milliliters649 ml
Liters0.65 L
US gallons0.17 gal
Part A (resin), 1:111 fl oz
Part B (hardener), 1:111 fl oz

Ratios here are by volume. If your kit gives a ratio by weight, follow the manufacturer’s instructions and weigh each part.

How this calculator works

Volume formula: length × width × depth = cubic inches. Convert to fluid ounces: cu in × 0.554 = fl oz. A 12 × 12 × 0.125 inch tabletop seal coat is 18 cubic inches = 10 fluid ounces of mixed resin.

Resin products are sold by mixed-volume or by combined weight. "32 oz kit" usually means 32 oz total after mixing resin + hardener in whatever ratio the brand specifies (1:1, 2:1, 3:1). Buy at least 10%–15% more than the math says to account for drips and the inevitable spill.

Pour depth limits matter. Standard tabletop epoxy (ArtResin, Pro Marine) is rated for 1/8 inch max per pour. Deep-pour epoxy (Table Top Pro, Deep Pour) handles 1–3 inches per layer. Pouring thicker than rated causes overheating, bubbling, cracking or incomplete cure.

River table math: a 60 × 20 inch tabletop with a central 6-inch-wide river at 1.5 inches deep needs 60 × 6 × 1.5 = 540 cu in = 299 fl oz = about 2.3 gallons of mixed resin. Deep-pour epoxy at 1.5 inch limit means it can be done in one layer; standard epoxy would require ~12 layers of 1/8 inch each.

Mix ratio matters. 1:1 by volume = equal resin and hardener (ArtResin). 2:1 by volume = 2 parts resin to 1 part hardener (common for deep-pour). Measure volumetrically with graduated cups, not visually. Off-ratio mixes cure sticky or brittle.

Worked example

River table: 60 × 20 inch top with 6-inch wide × 1.5-inch deep river

  1. River volume: 60 × 6 × 1.5 = 540 cubic inches.
  2. Fluid ounces: 540 × 0.554 = 299 fl oz = about 2.3 gallons mixed.
  3. Buy at least 15% extra for safety: 299 × 1.15 = 344 fl oz ≈ 2.7 gallons.
  4. With deep-pour epoxy (1.5-inch max per layer), this is one pour.
  5. With standard tabletop epoxy (1/8-inch max), you need 12 layers (1.5 ÷ 0.125). Each layer is 540 ÷ 12 = 45 cu in = 25 fl oz mixed per pour. Each layer needs 4–8 hours partial cure before the next.

Common mistakes

  • Pouring deeper than rated. Standard epoxy over 1/8 inch overheats and cracks.
  • Measuring resin + hardener by weight when the ratio is by volume (or vice-versa). Densities differ, so the two aren't interchangeable.
  • Not accounting for the void volume in river tables. The wood sides of the void soak up some resin; buffer helps.
  • Pouring in a cold room (<65°F / 18°C). Cure takes forever and surface may stay tacky.
  • Mixing less than 30 seconds. Properly mixed resin+hardener needs a full 2–3 minutes of scraping-the-sides stirring to react uniformly.

Limitations of this calculator

  • Assumes a rectangular pour cavity; irregular shapes need volume measured, not calculated.
  • Does not model wood absorption on the first seal coat, which can soak 10%–20% extra.
  • Does not include demolding and surface finishing steps.
  • Does not account for inclusions (glitter, pigments, embedded objects) that displace resin.

For your specific situation, consult a tax professional or financial advisor.

Questions people ask

How much epoxy do I need?

Calculate volume (length × width × depth), convert to ounces (× 0.554), add 10%–15% buffer. For a 12 × 12 × 1/8 inch top, you need about 10 oz; buy at least 12.

What is deep-pour vs standard epoxy?

Standard tabletop (ArtResin, Pro Marine, ECOPOXY FlowCast) cures hot and is rated for 1/8" max per pour. Deep-pour (Table Top Pro Clear, Alumilite, Deep Pour) cures slower and cooler, allowing 1–3" per pour.

What is the mix ratio?

Varies by brand. 1:1 by volume is most common for tabletop (ArtResin, Pro Marine). 2:1 or 3:1 for deep-pour. Always check the label — mixing at the wrong ratio causes cure failures that cannot be fixed.

How long does epoxy take to cure?

Tack-free in 4–24 hours, full cure in 72 hours for standard, 7+ days for deep-pour. Temperature matters: cold rooms cure slowly, warm rooms cure fast (and risk amine blush or exothermic cracking).

Sources

Last reviewed October 19, 2026