How this calculator works
Backing should be 4 inches larger than the quilt on each side to allow for shift during basting and longarm quilting. A 60 × 72 inch top needs a 68 × 80 inch backing — 8 inches larger on each dimension.
Standard quilting cotton is 42 inches wide usable. For any backing wider than 42 inches, you need to piece. Two options: vertical seam (two panels side by side, seam running up and down) or horizontal seam (two panels stacked, seam running left to right). Pick whichever uses less fabric.
Vertical seam math: cut two lengths equal to the quilt length + 8 inches, then join them. For a 68 × 80 backing, cut two 80-inch lengths = 160 inches = 4.44 yards. Round up to 4.5 yards.
Horizontal seam math: cut two lengths equal to the quilt width + 8 inches, then join. For a 68 × 80 backing, cut two 68-inch lengths = 136 inches = 3.78 yards. Round up to 4 yards. Horizontal wins here by half a yard.
108-inch wide-back fabric eliminates piecing for quilts up to about 100 inches wide. One continuous length = quilt length + 8 inches. For a 80-inch-long quilt, buy 88 inches ≈ 2.5 yards of 108-inch backing. More expensive per yard but no seam.
Worked example
60 × 72 inch throw: compare seam direction and wide-back
- Backing dimensions: 68 × 80 inches (4-inch overage all around).
- Vertical seam from 42-inch WOF: cut 2 × 80 inches = 160 inches ÷ 36 = 4.44 yd → buy 4.5 yd of 42-inch fabric.
- Horizontal seam from 42-inch WOF: cut 2 × 68 inches = 136 inches ÷ 36 = 3.78 yd → buy 4 yd. Winner by 0.5 yd.
- 108-inch wide-back: cut 1 × 80 inches = 2.22 yd → buy 2.5 yd. Fewer yards but higher $/yd.
- At $11/yd quilting cotton vs $18/yd wide-back: 4 × $11 = $44 vs 2.5 × $18 = $45. Essentially tied; wide-back saves time and avoids the seam.
Common mistakes
- Buying exactly the quilt-top size with no overage. There is no room for the quilt to shift under the longarm.
- Not pressing the backing seam open. A pressed-to-one-side seam creates a visible ridge through thin batting.
- Mixing light and dark fabrics in a scrappy back with a light quilt top. The dark pieces can show through.
- Ignoring shrinkage. Unwashed cotton shrinks 3%–5%; pre-wash both backing and top or neither to avoid pulls.
Limitations of this calculator
- Assumes 42-inch WOF; use the 108-inch option for wide-back fabric.
- Does not model specialty backings (minky, flannel) which have different widths and sometimes stretch.
- Does not include shrinkage buffer; pre-wash first if you plan to.
For your specific situation, consult a tax professional or financial advisor.
Questions people ask
How much larger should backing be than the quilt top?
4 inches on each side (8 inches total each dimension) is the standard allowance for basting shift and longarm clamping. Hand quilters sometimes go with 2–3 inches.
Horizontal or vertical seam — which looks better?
On the finished quilt back the seam direction barely matters because the back is rarely seen fully. Pick the one that uses less fabric. For balance, some quilters center the seam; others offset it so it doesn't align with any seam on the front.
When is wide-back fabric worth it?
Any quilt wider than about 50 inches, because it eliminates piecing. Also when you want a specific print (many wide-back prints coordinate with popular fabric lines). Cost is often similar once you count the extra seam fabric saved.
Can I piece a backing from leftover fabric?
Yes — scrappy backs are popular. Build it to be at least 68 × 80 inches (for the throw example) and press all seams open to avoid lumps.
Sources
Last reviewed October 19, 2026