Built in Lahore, PakistanHow we check the math
Craft & making

Quilt Binding Calculator

Enter the quilt dimensions and binding width to get the number of strips to cut, how much fabric to buy, and the total binding length with corner and seam allowance.

Units
2¼ in or 2½ in is standard for double-fold binding.
After removing selvages, usually 40–42 in.
For joining strips, mitred corners and the final join.

Binding fabric to buy

½ ydFabric to buy for binding

Quilt perimeter264 in
Binding length needed276 in
Strips to cut (width of fabric)7
Fabric used17.5 in

Yardage is rounded up to the next ⅛ yard (or 10 cm), the smallest cut most shops sell.

How this calculator works

Total binding length is the quilt perimeter plus ~12 inches for joining seams and mitered corners. For a 60 × 72 inch throw: perimeter = 2 × (60 + 72) = 264 inches; add 12 inches = 276 inches of binding needed.

Divide binding length by the usable width of fabric (WOF, typically 42 inches after selvages). 276 ÷ 42 = 6.57, round up to 7 strips. Rounding down leaves you short at the finish line, which is why the formula always rounds up.

Strip width depends on fold style and quilt thickness. 2.25 inches is the modern standard for machine binding on thin quilts; 2.5 inches gives more wiggle room and is forgiving for hand binding or thicker battings. The calculator supports both.

Yardage: strips × strip width = total inches of fabric needed down the grain. 7 strips × 2.5 inches = 17.5 inches ≈ ½ yard. Add 1/8 yard buffer for a cutting mistake; most quilters round up to a round half-yard increment.

Bias binding (strips cut at 45°) handles curved edges and wears better over time but needs about 40% more fabric. For a straight-edge quilt, straight-grain binding is standard; use bias when the quilt has scalloped or rounded corners.

Worked example

A 60 × 72 inch throw with 2.5-inch straight binding

  1. Perimeter: 2 × (60 + 72) = 264 inches.
  2. Add corners and joining seams: 264 + 12 = 276 inches of binding needed.
  3. Strips from WOF 42 inches: 276 ÷ 42 = 6.57 → round up to 7 strips.
  4. Fabric down-the-grain: 7 × 2.5 = 17.5 inches = ½ yard (actual 18 inches).
  5. Buy ½ yard for exact fit, ⅝ yard to allow one re-cut.

Common mistakes

  • Rounding strips down instead of up. You will run short by 2–3 inches near the finish line.
  • Forgetting to add 12 inches for joining seams and corners. On a baby quilt it is a minor miscalculation; on a king quilt it is a half strip.
  • Mixing fabric from different bolts without checking color/pattern match. Binding is one continuous visual line; a seam showing a different print is obvious.
  • Cutting straight-grain binding for a scalloped-edge quilt. It cannot curve smoothly; bias is required.

Limitations of this calculator

  • Assumes 42-inch WOF; some quilt-shop fabric is 44 inches, which gives slightly more per strip.
  • Does not model bias strip calculation; use the bias option in the tool.
  • Does not account for shrinkage from pre-washing (3%–5% on cotton).
  • Does not calculate pieced or scrappy binding, which uses the same perimeter but different fabric sources.

For your specific situation, consult a tax professional or financial advisor.

Questions people ask

How wide should quilt binding be?

2.25 inches for machine-stitched binding on thin quilts (gives a tight 3/8-inch finish); 2.5 inches is the standard forgiving width that works for hand or machine, thin or thick batting.

When do I need bias binding?

Scalloped edges, rounded corners, or heirloom quilts you want to last decades. Bias wears longer because threads cross the edge diagonally rather than aligning with it. Needs 40% more fabric.

How much extra fabric should I buy?

The strip math already includes 12 inches for joining and corners. Add another 1/8 yard if you want insurance against a cutting mistake or a crooked piece of fabric.

Can I cut binding across the width or down the length?

Cross-grain (across the width, parallel to the selvage) is standard — the fabric has more give that way, which helps bind corners. Lengthwise strips (parallel to the selvage) are stiffer and good for straight edges with no corners.

Sources

Last reviewed October 19, 2026